A wetsuit bulge, also known as a “wedgie” or “wet trunk,” is a condition that can occur when wearing a wetsuit. It is caused by the trapping of air in the suit, which creates a bulge in the fabric. The bulge can be uncomfortable and can cause chafing. It can also be dangerous if it happens while swimming, as it can cause you to lose buoyancy and drown.
There are several ways to prevent a wetsuit bulge from happening. First, make sure that your wetsuit fits properly. It should be snug but not too tight. Second, take care when putting on your wetsuit. Avoid pulling the fabric too tight or stretching it too much. Third, wear a weight belt to help keep the wetsuit in place. Fourth, use talcum powder or cornstarch to help reduce friction. Finally, practice swimming with your wetsuit on so that you are familiar with how it feels and how it affects your buoyancy.
If you do get a wetsuit bulge, there are several ways to get rid of it. First, try exhaling deeply and repeatedly until the bulge goes away. Second, try gently pushing the bulge back into place with your hands. Third, try moving around in the water to reposition the bulge. Finally, if all else fails, you can always stop and take off your wetsuit to readjust it.
What Causes Wetsuit Bulge?
Wetsuit bulge is caused by a combination of factors. The first is wearing a wetsuit that is too tight. This puts pressure on the stomach and forces the abdomen to bulge out. The second factor is body fat. People who are overweight or have a lot of body fat are more likely to develop wetsuit bulge. Finally, pregnancy can also cause wetsuit bulge.
The best way to prevent wetsuit bulge is to make sure you’re wearing a well-fitting wetsuit. If you’re overweight or have a lot of body fat, you may want to consider losing weight or doing some exercises to tone your abdominal muscles. If you’re pregnant, you can try wearing a tankini or swimdress over your wetsuit to help support your stomach.
How to Prevent Wetsuit Bulge
Wetsuit bulge can be a nuisance when surfing, but there are a few things you can do to prevent it. First, make sure your wetsuit fits properly. If it is too loose, it will bunch up and create bulges. Second, try to tuck in any loose fabric or straps so they don’t bunch up. Lastly, wear a tight-fitting rash guard or wetsuit top to help keep everything in place.
Choose the Right Wetsuit
One of the best ways to prevent wetsuit bulge is to choose the right wetsuit. A wetsuit that is too tight will cause bulging, while a wetsuit that is too loose will not provide the support you need. When you are trying on a wetsuit, pay attention to how it feels. If it feels constricting, it is probably too small. If it feels like it is sagging in certain areas, it is probably too large.
Another way to prevent wetsuit bulge is to make sure that your wetsuit fits properly. A well-fitting wetsuit should be snug but not constricting. It should also allow you full range of motion. If your wetsuit does not fit properly, it will not provide the support you need and you will be more likely to experience bulging.
Finally, make sure that you buy a wetsuit that is made from high-quality materials. A good wetsuit will be made from durable materials that will not stretch or sag over time. This will help to ensure that your westsut continues to fit properly and does not cause you to experience bulging.
Use a Wetsuit Hanger
One way to prevent wetsuit bulge is to store your wetsuit on a well-made wetsuit hanger. These hangers are designed to hold the weight of a wet or dry wetsuit without stretching out the material. This will help your wetsuit retain its shape and avoid Bulge.
Another way to prevent Bulge is to make sure you rinse your wetsuit out with fresh water after each use. This will remove any salt, sand, or other debris that could cause the material to weaken and stretch over time. Be sure to hang your wetsuit up to dry in a well-ventilated area away from direct sunlight.
If you notice that your wetsuit is starting to bulge, you can try spot-cleaning the affected areas with a mild soap and cool water. Once the soap has been removed, rinse the area thoroughly with fresh water and hang the wet suit up to dry in a well-ventilated area away from direct sunlight.
Hang Your Wetsuit to Dry
Hang your wetsuit on a wide, padded hanger to help it retain its shape as it dries. You can also lay your wetsuit out on a flat surface, like a table or the floor, to air dry. Avoid hanging your wetsuit in direct sunlight, as this can cause the material to degrade over time.
We hope you found this guide helpful and that you can use these tips to prevent wetsuit bulge. Remember, a little bit of prevention can go a long way in ensuring that your wetsuit lasts for many seasons. With proper care and storage, your wetsuit should give you years of enjoyment.